1 / 7
Particle Filter for Garden Hose with Threaded Adapters
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Particle filter for garden hoses; with glue-on adapters for gardena or systems with G3/4 thread.
- Rating
- 0 / 5
- Likes
- 76
- Downloads
- 167
- Makes
- 0
- Views
- 1,467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Additional required parts:
- 4x Screws M3x10
- 4x Square Nut M3 (DIN 562)
- 1 ¼" Gasket (39mm outside diameter, 30mm inside diameter)
- A piece of garden fleece or similar cloth suitable for filtering
- Zip ties or thread to fix the filter material
- Glue (water resistant, suitable for chosen material)
My make was printed in Prusament PC-Blend orange, but PETG should also work.
All parts can be printed without support.