1 / 2
Bostitch SB-1850BN Nailer replacement tip pad — image 1
1 / 2

Bostitch SB-1850BN Nailer replacement tip pad

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If your nailer pad got dry and falls off all the time, try one of these. They fit over the tip and snap down. Go TPU.

Rating
0 / 5
Likes
1
Downloads
54
Makes
0
Views
158
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

The pads are modeled after the original version on the Bostitch SB-1850BN (18 gauge nailer), but longer so that they drop down over the snakehead-shaped tip of the nailer. For best performance, print in TPU. Print multiples if you want. Use a brim for print stability (5mm worked for me). Stab the nailer tip into the pad pocket, then rock the whole thing down until it snaps in place. It should pivot back and forth a few degrees left and right.

Tags