1 / 2
Bostitch SB-1850BN Nailer replacement tip pad — zdjęcie 1
1 / 2

Bostitch SB-1850BN Nailer replacement tip pad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If your nailer pad got dry and falls off all the time, try one of these. They fit over the tip and snap down. Go TPU.

Ocena
0 / 5
Polubienia
1
Pobrania
54
Wydruki
0
Wyświetlenia
158
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

The pads are modeled after the original version on the Bostitch SB-1850BN (18 gauge nailer), but longer so that they drop down over the snakehead-shaped tip of the nailer. For best performance, print in TPU. Print multiples if you want. Use a brim for print stability (5mm worked for me). Stab the nailer tip into the pad pocket, then rock the whole thing down until it snaps in place. It should pivot back and forth a few degrees left and right.

Tagi