Liczymy pasujące modele…
This is a quick N Scale (1:160) model I did of an old house in Chance Harbour, NB, Canada. This model is meant to have inkjet-printed siding and roofing details added, in an experiment to create more detailed models at that small scale.…
This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Steamstrain Leviathan of 1850 was a marvel of engineering and a symbol of progress in the burgeoning age of steam power. Here's an overview:…
A common computer mouse part that breaks is the scroll wheel axle. Initially, I tried printing a replacement out of curiosity but its actually more practical than I thought it is. The SW17 and stl files for the Microsoft 1850 mouse are…
I needed a bracket to securely hold a 18500 battery for a recent project. In that case the bracket was merged into the body of the container lid. But I realized the bracket itself might be handy for others, so I added flush mount M2 screw…
These two holder designs allow either 2x 18500 LiPo cells, or 2x 18650 LiPo cells, to be charged in parallel by connecting it to your existing LiPo charger with an XT-60 cable. You need to use an actual charger with this holder, not just…
18500 Battery holder with contacts (nickle stips). Just pull them trough the two slots.
3S Battery holder The holder is designed for batteries with a diameter of 18mm (18650, 18500, 18350 etc) To make it you need: print 2pcs of model long screw M3 - 1pcs screw M3x6mm - 6pcs nut M3 - 7pcs cable connector - 6pcs (optional)…
Makes it so your controller can accept 18500's (like the 18650 but shorter) so it will fit into an Xbox One controller. Use a little bit of aluminum foil to bridge between the spot where the other battery is supposed to be.
4S1P/2S2P 18500 Li-Ion Battery Case Cutouts on the terminals are designed for “Keystone Cylindrical Battery Contacts” Mfr. No.: 5212 (Keystone Cylindrical Battery Contacts, Clips, Holders & Springs POS BUTTON CNT A/AA) Mfr. No.: 5202…
Printing This model prints without supports. The tolerances are pretty tight but nothing that should be a problem for a moderately tuned printer. Due to some small details I only printed with 0.2mm layer height. I recommend using 2 walls…
Simple battery holders with lid holds a single 18350, 500 and 650 battery. Minimal size but ensures the battery is protected and kept away from possible shorts in pockets and rolling around in the bottom of bags Category: Other
2S1P 18500 Li-Ion Battery Case Cutouts on the terminals are designed for “Keystone Cylindrical Battery Contacts” Mfr.: 5212 (Keystone Cylindrical Battery Contacts, Clips, Holders & Springs POS BUTTON CNT A/AA) Mfr.: 5202 (Keystone…
Converts a flashlight that uses either 3x AAA sized batteries or 1x18500 for use with standard 18650 lithium ion cells. Use a nickel strip for the electrical connection (small cable should also work). The Fusion 360 file has parameters,…
A case for 2x 18500 Li-Ion batteries with slots where an optional metal strip can be inserted to connect the terminals to either create 2P or 2S configuration - or without any connection, the batteries can be used individually. Since I…
Spacing ring for flashlight conversion from 3xAAA to 18650,18500,18490 Li-ion battery. Print in Spiral Vase mode, No Top/Buttom layer. How to: https://www.youtube.com/watch?v=wGkg4x7K6Rw Print Settings Printer Brand: Anet Printer: A8…
The pads are modeled after the original version on the Bostitch SB-1850BN (18 gauge nailer), but longer so that they drop down over the snakehead-shaped tip of the nailer. For best performance, print in TPU. Print multiples if you want.…
My flashlight uses three AAA batteries and I wanted to replace them with a single 18500 lithium battery so I needed an adapter because the battery diameter was smaller than the flashlight tube. The cylinder I have made has 23mm external…
We've got broken the axle of the mouse wheel for our microsoft 1850 mouse. Found the replacement made by @someoneonly_24, but required to stick the axis to the encoder some way. As I don't like to use glue or heat electronical parts, I've…
I really like the original version and have now adapted it for 18500 batteries. Requires 4x M3x16mm screws and heat threaded inserts. Print two copies, drill out the thin layer in the screw holes, and bolt together. These batteries are…
This charger can be used with TP4056
Simple battery holders for Li-ION or LiFePO4 cells with place for a BMS-board. Versions for 18650, 18700 and 18500 cells. The 18700 version I made for a "18650 protected cell" I bought which would not fit in standard 18650-holders because…
The WHY2025 badge had holders for unprotected 18650 cells. I'd rather have protected cells in mine, so I made this adapter to make a protected 18500 battery fit in the holder. Use at your own risk. Each adapter requires either a…
Zinc casting of a German Shorthaired Pointer, (1850). Org. size: ca. 30x18x10 cm Scan is done with a RevoPoint Inspire 3D Scanner Resinprinter: AnyCubic Photon Resin: ABS Like Resin Origin and Temporal Context Zinc casting was a popular…
Li-ion /LifePo4 safety warning For use with “ protected ” cells only. Unprotected cells can be discharged too much making them hazardous when re-charged. Some flashlights are sealed tubes with o-rings at each end. In the worst-case…
Hot End Holder for DIAFIELD 1850W Heat Gun Holds the four nozzles
or This static wooden dock features vertical pilings and horizontal planks, capturing the rugged aesthetic of 1850s harbour infrastructure. Inspired by isolated timber structures from the mid-19th century, it offers a detailed…
A faithful 1850s scale model of a small open steam launch featuring a slim wooden hull, tall funnel, and canvas awning. Inspired by historic short-crossing vessels, this design captures the era's functional elegance with clean, unlettered…
A detailed 1850s single-mast water hoy featuring a distinctive round tank amidships and clean, unlettered paintwork. Inspired by historical Cisternel vessels, this model captures the authentic 4.3:1 length-to-beam ratio in a three-quarter…
A detailed 1850s sailing collier featuring a low black hull and twin square-rigged masts. Inspired by historic coal carriers, this model captures the authentic proportions of the era. Print with supports enabled to ensure clean details on…
This detailed 1850s waterworks features a brick pumping station, tall chimney, and reservoir in a single cohesive structure. Inspired by historical industrial architecture, it captures the era's engineering with clean, unlettered…
Modified kone's model to have the two adaptors joined together, should be harder to lose and more sturdy in the charger. Category: Electronics
A detailed 1850s mixed farm featuring a timber barn, grain silo, and fenced crops in a broad low layout. Inspired by historical agricultural sites, this model offers a realistic three-quarter view for display. Print with supports enabled…
A detailed 1850s timber site featuring a dense conifer stand, stacked logs, and a small office. Includes a separate slewing crane for dynamic display. Print with supports to ensure stability of the tall trees and crane arm. Size as…
This detailed 3D model captures the elegant lines of a mid-19th-century paddle packet steamer, featuring a clipper bow and prominent side paddle boxes. Inspired by the classic Wheelwash design, it showcases a tall single funnel and a low…
A low-slung open gondola inspired by mid-19th century coal and timber transport, featuring plank sides with a drop door and iron corner straps. The model stands upright on its own running gear with a clean side profile and unlettered PBR…
A slender, narrow-profile freight wagon inspired by 1850s insulated vans with thin walls and small vents. Features no hatches for a clean, period-accurate aesthetic. Use supports for the thin walls and small vents to ensure a clean print.…
This detailed open-pit mine features stepped red-brown benches, a headframe, and a loading tipple inspired by 19th-century industrial sites. The model is designed for a clean, unlettered aesthetic with photographic PBR textures suitable…
3S Battery holder The holder is designed for batteries with a diameter of 18mm (18650, 18500, 18350 etc) To make it you need: print 2pcs of model long screw M3 - 1pcs screw M3x6mm - 6pcs nut M3 - 7pcs cable connector - 6pcs (optional)…
It seems to fit pretty well after a few trial and errors. I used TPU with a Durometer of 95A. It doesn't seem as soft as the one that came with it but it doesn't seem to leave marks. I printed it so the opening was directly up on a stain…
