1 / 5
k1/k1max/k1c/k1se mgn12 xy joints
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
these joints have been modified to work with f695 5 mm bearings
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
you can use this with the factory bearings or f695 you will need 8 in total 2 for each hole just use m3 bolts as normal and they will work fine you may need a 1 mm washer/shim for the two bottom holes aka the ones you can see from outside the machine … there are holes for 3 mm hex nuts as well …. takes a 320 mm rail for k1/k1c/k1se, the k1 max takes 400 mm rail
.2 mm layer heigh
pla is fine but if going a heated chamber use a more heat resistant filament such as abs or asa