1 / 5
k1/k1max/k1c/k1se mgn12 xy joints — zdjęcie 1
1 / 5

k1/k1max/k1c/k1se mgn12 xy joints

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

these joints have been modified to work with f695 5 mm bearings

Ocena
0 / 5
Polubienia
4
Pobrania
28
Wydruki
0
Wyświetlenia
380
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

you can use this with the factory bearings or f695 you will need 8 in total 2 for each hole just use m3 bolts as normal and they will work fine you may need a 1 mm washer/shim for the two bottom holes aka the ones you can see from outside the machine  … there are holes for 3 mm hex nuts as well …. takes a 320 mm rail for k1/k1c/k1se, the k1 max takes 400 mm rail 

.2 mm layer heigh 

pla is fine but if going a heated chamber use a more heat resistant filament such as abs or asa 

Tagi