Whirlpool Washer 2-in-1 Removable Agitator Parking Storage Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parking storage spot for the Whirlpool Washer 2-in-1 Removable Agitator.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 1
- Views
- 101
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This model is a parking or storage spot for the Whirlpool Washer 2-in-1 Removable Agitator. Model is oriented modeled in orientation it should be printed. Recommended slicer settings are 20% infill with 3 perimeters and supports enforced under the "clips." There are 2 variations. One for storing the agitator perpendicular to a surface, one at 90 degrees.
To use, mount in desired location with screws. Screw holes are sized for #6 ANSI flat head screws. Clipping the agitator works in the same way as inserting and removing from the washer. While holding handle on agitator, insert into parking spot, and twist clockwise until it stops turning. Release agitator handle to lock into place. To remove, hold down handle, twist counter-clockwise, and pull out of parking spot.
2025/11/25 - Added Fusion model file.