CR125 Clutch Basket Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to torque the clutch and primary drive gear of a Honda CR125 engine, should fit from 1985-2007.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A tool to torque the clutch and primary drive gear of a Honda CR125 engine, should fit from 1985-2007.
Requires a handle to be added, there are two M6-1.0 threaded through holes for the handle. I used a long piece of 1.5in x 0.25in aluminum I had lying around for mine, but even a piece of wood should work fine. Make sure to leave enough room to fit the socket on the clutch when adding the handle though.
I printed mine out of PETG with a 0.6mm nozzle, 0.2mm layer height, 4 perimeters, a minimum top and bottom shell thickness of 3.5mm, and 15% infill.