Fly Screen Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A friend has fly screens that use an older form of clip to hold them in place. The clips don't seem to be available now.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These clips (white one pictured) do not appear to be available any more.
So I programmed the CAD up in OpenSCAD and printed them out. They seem to work nicely.
module rsquare(size, radius) { assert(radius < size.x / 2, "Radius must be less than half the width"); assert(radius < size.y / 2, "Radius must be less than half the height");
minkowski() { square([ size.x - radius * 2, size.y - radius * 2 ], center = false); circle(radius); }}
$fn=60;
difference(){ union() { linear_extrude(1) rsquare([6.4,22.34],2); translate([0,0,1]) linear_extrude(2) rsquare([3.2,21.34],0.75); linear_extrude(1) translate([-9,0,0]) rsquare([15,6.4],2); translate([1.,1.7,0]) cylinder(6,6.4/2,6.4/2); translate([1.,1.7,0]) cylinder(8.4,2.1,2.1); // Connector translate([1.,1.7,7.4]) cylinder(3,2.7,2); // Cap } union() { translate([-2.2,2.25,5]) rotate([90,0,0]) linear_extrude(1.1) square([10,10]); // notch }}