1 / 4
Wakizashi 40 Keyboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reverse stagger 40% inspired by Katana 60.
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 187
- Makes
- 0
- Views
- 2,588
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Required parts
- M3 12mm x 6
- M3 16mm x 6
- M3 nut x 12
- Microcontroller e.g. Arduino Pro Micro, Teensy2.0…
- (Optional) USB breakout board to glue to the case
- 45 x keyswitch
- 2 x 2u plate mount Cherry stabiliser
- 45 x diodes e.g. 1N4148
Printing
Flip the plate pieces upside down so there are no overhangs. Make sure the pieces are flat on the print bed.
Wiring
Firmware
- Compiled firmware (source)
- VIA json (File > Import Keymap)
Update 2022-03-07
- Fixed hole sizing to fit keyswitch better.
- Added optional blocker to fill the gap in the centre of the plate.
Clueboard 66%
If you want something bigger, take a look at my 3d printed Clueboard.