Wall Holder for Hewlett Packard ZBook 15 Mobile Workstation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted my work notebook off my desk for space and noise reasons, so I designed this wall holder.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I wanted my work notebook off my desk for space and noise reasons, so I designed this wall holder. Hole spacing is 60 mm, a 4 mm Philips flat head wood screw will fit. I designed this for a pretty hefty 15 inch mobile workstation, so most any notebook should fit. You need to adjust the spacing of the two pieces to your requirements of course.
I printed this in PETG 0.2 mm resolution. The slight angle away from the wall is intentional so that the hot air exhausted out the bottom of the notebook can escape better, also easier to drop it into the slot.
Print instructions
Category: Computer Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 20%
Filament: Prusament PETG black
Notes:
If you look at the picture "print orientation", this is how the part is intended to be printed. This requires no support structures.