Wyze Cam Pan V3 front door mount for Qidi Plus4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wyze Cam Pan V3 front glass door mount for Bambu P1S/X1C modified to work on a Qidi Plus4
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a slight adaptation to the original model to allow it to mount to the front glass of the Qidi Plus4. The original screws are a little tight so I suggest threading them through the mount first and make sure to seat them all the way to the bottom before mounting. I also apply a thin strip of 3M VHB tape near the bottom of the drop leg but leave the backing on to act as a dampener against the glass. As you can see the door does open to at least 90 degrees but is slightly more limited over stock due to the thickness of the upper mount. I have printed in both PETG and PLA and both seem to hold up fine. PETG may be a better option in the long run with the heated chamber of the Qidi Tech printer. This remix was done by cutting and splicing in Bambu Studio so don't expect fusion 360 quality aside from the original model.