1 / 2
Metolius Superclip Adapter — image 1
1 / 2

Metolius Superclip Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter from Metolius Superclip to Mammut Short probe.

Rating
0 / 5
Likes
3
Downloads
14
Makes
0
Views
100
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Im tired of printing clipsticks for climbing and ending up with fatigue fractures in my parts. The last one i printed was in PETG, and that did not work with the part flexing on a small piece of the print over several cycles, so i bought the Metolius Superclip and spent way more time than i should have learning SolidWorks to make a adapter from the Superclip to my avalanche probe.

 

For this model to work you need to cut off the tip of your avalanche probe. Might revisit this model if anyone wants an adapter with the probe intact. I think i will add a hole for a setscrew so there is no need to glue or tape the probe to the adapter. Also might add a way to “click” the adapter to the Superclip. 

This print is meant for the Mammut Short probe (240cm), or a pole with external diameter of 11.25mm. 

I glued the Superclip to the model and the probe to make sure it doesn’t come loose or unthread.

  • Infill: 25%
  • Material: PETG
  • Walls: 4
  • Infill type: Gyroid adaptive 
  • Support: Printbed only

Infill is probably overkill but i want to be sure it holds up. 

Happy Climbing!