1 / 4
Stamp with exchangeable plate motif "flat ist boring" — image 1
1 / 4

Stamp with exchangeable plate motif "flat ist boring"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.15 – €1.40 net (excluding VAT)

For file: STAMP FIB 11 Griff_diff_0.3mm_PLA_MK3S_1h16m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.27 excluding VAT (range midpoint).

Weight reported by the author
16 g
Print time reported by the author
1.27 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Stamp with exchangeable plate and with theme "flat is boring"

Rating
0 / 5
Likes
7
Downloads
44
Makes
0
Views
238
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

EN:

The stamp is designed so that the stamp plate on the stamp foot can be exchanged. This means that different motifs can be stamped with the same stamp handle. (PLA, Prusament mystic brown).
The recesses visible from the front and side serve to make it easier to remove the stamp plate with a thin screwdriver or a flat metal lamella. In general, the system is designed in such a way that the plate should actually hold in the stamp base by itself. In the event that it does not hold, you can use removable transparent UHU pads. You can also use any other sufficiently thin double-sided adhesive as long as it doesn't promise too much adhesion. 
As for the sheet, I have tested TPU 70A, 85A and Vaioshore. Filaflex 70A and 85A produce good results in terms of shape, but the stamping ink does not adhere well to them, which leads to pale images. Varioshore, on the other hand, gives a poorer typeface in my experience. So I had the idea of roughening the stamp plate with sandpaper (grit 400-2000), which gave acceptable results with 3DFils eFil TPU 85A (see picture). A note in passing: The plate is more curved at one corner than at the others so that it always be inserted in the same way.
I intend to design more motifs in the near future.

Motifs/box see: 

smiley-2c
smiley-2b
smiley-2a
smiley-1
Motif organizer-box

Material: Stamp handle: PLA, PETG..., Stamp plate: FLEX, (TPU) 85A
Layers: Stamp handle: 0.3mm, Stamp plate: 0.2mm
Infill: handle: 15%, plate: 100%
Supports: Stamp handle: yes, stamp plate: no

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

DE:

Der Stempel ist so gestaltet, daß sich die Stempelplatte am Stempelfuß austauschen läßt. Somit können unterschiedliche Motive mit demselben Stempelgriff gestempelt werden. (PLA, Prusament mystic brown).
Die von vorne und er Seite sichtbaren Ausnehmungen dienen der Möglichkeit, mit einem dünne Schraubenzieher, einer flachen Metalllamelle die Stempelplatte besser ablösen zu können. Im Allgemeinen ist das System so konzipiert, dass die Platte eigentlich von alleine im Stempelfuß halten sollte. Für den Fall, dass es nicht halten sollte, kann man wiederablösbare durchsichtige UHU-Pads verwenden. Es kann auch jedes andere genügend dünne doppelseitige Klebebend genommen werden, solange es nicht zu hohe Haftfähigkeit verspricht. 
Die Platte betreffend habe ich TPU 70A, 85A und Vaioshore getestet. Filaflex 70A und 85A bringen zwar gute Ergebnisse von der Form her, doch hält di Stempelfarbe darauf nicht gut, was zu blassen Bldern führt. Varioshore wiederum gibt meines Ersachtens bei mir ein schlechteres Schriftbild. So kam mir die Idee, mittels Schleifpapier (Körnung 400-2000) die Stempelplatte aufzurauhen, was akzeptable Ergebnisse mit 3DFils eFil TPU 85A (siehe Bild) lieferte. Noch ein Hinweis am Rande: Die Platte ist an einer Ecke stärker gekrümmt als an den anderen, damit man sie immer in gleicher Weise einbringt.
Ich gedenke in Kürze weitere Motive zu gestalten.

Motive/Box siehe: 

smiley-2c
smiley-2b
smiley-2a
smiley-1
Motiv-Aufbewahrungsbox

Material: Stempelgriff: PLA, PETG..., Stempelplatte: FLEX, (TPU) 85A
Schichten: Stempelgriff: 0.3mm, Stempelplatte: 0.2mm
Infill: Griff: 15%, Platte: 100%
Stützen: Stempelgriff:  ja, Stempelplatte: nein

Tags