SPS V2 Back Panel mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is for Smart filament sensor by BTT v2. You can mount on the back panel from inside.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
This custom-designed mount is specifically created for securely installing the BTT Smart Filament Sensor V2.0 inside the rear panel of a Voron 3D printer (such as the Voron 2.4 or Trident). The model ensures optimal alignment and clearance for filament detection while maintaining a clean and enclosed aesthetic.
Features:
Internal Rear Panel Mounting: Allows the sensor to be mounted inside the printer enclosure, minimizing external clutter and exposure to debris.
Precise Fit: Designed to match the form factor of the BTT Smart Filament Sensor V2.0, with exact mounting hole spacing and wire routing.
Cable Management: Includes channels or reliefs to accommodate sensor cabling for easy connection to the controller board (e.g., Manta, Octopus, or EBB).
Filament Path Alignment: Ensures the filament passes straight through the sensor and into the extruder without excessive friction or bending.
Mounting Options: Compatible with either M3 screws and heat-set inserts or panel clips, depending on your rear panel setup.
Print-Friendly Design: Optimized for FDM 3D printing in common Voron materials (e.g., ASA, ABS), requiring no supports.
Recommended Installation:
Print in ABS or ASA for thermal stability inside heated enclosures.
Mount directly on the rear panel’s inner face, ideally at filament entry height.
Route filament from spool holder or buffer through a PTFE guide to the sensor.