Kolver FAB12 RE Electric Torque Screwdriver Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The housing rotted on my Kolver screwdriver so I modeled it with the same design for replacement.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a nearly exact replica of the housing for the Kolver FAB12 RE screwdriver I got with some stuff I purchased. For some reason the plastic on the original basically rotted out and became extremely brittle. It was basically disintegrating in my hands.
I didn't even bother looking to see if they still sold this housing as what's the point of having a 3d printer if you can't make your own replacement parts. It was a bit of a challenge to get everything modeled more or less the same as the original but I was able to get it working and fitting pretty well.
Simply disassemble your old one and reassemble using the original screws. I did end up adding an extra screw near the connector for added strength however it is not necessary with the metal D ring that the screwdriver hangs from and inserts into the holes on the top sides. If you would like to use the screw you will need a M2 or M2.2 x 8mm plastic threading screw similar to the original 12mm screws.
I reused the original switch however I modeled it as well in case you need it.
I printed mine in Polymaker Jet Black ASA and it came out beautifully. I tried ASA CF at first but I find it to be a little more brittle and it split when screwing it together. PETG would also work well.
Printed in 0.2mm layers, 3 walls, 25% gyroid infill, outer and inner brim, hybrid tree supports @ 30degrees (make sure to force support at the overhang at the top where the GX16-5 power connector sits).