1 / 2
EXTRA PRINTABLE Print in Place 6200 Ball Bearing — image 1
1 / 2

EXTRA PRINTABLE Print in Place 6200 Ball Bearing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An updated, extra printable version of my print in place 6200 ball bearing.

Rating
5 / 5
Likes
37
Downloads
468
Makes
2
Views
1,163
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution

Once upon a time I found myself in need of a 6200 series bearing but only had a bunch of 608s on hand, so I thought I'd print one up and see if it worked - it did! But it wasn't the simplest or most reliable thing to print, it required support, it could be finnicky about bed ahesion, and was all in all not my favorite work.

So I started again.

Taking what I learned the last time I came up with this, an EXTRA printable print in place ball bearing - now with no support required!

From the cross section image you can see some of the changes and improvements. The balls in the bearing are now entirely encapsulated both within the body of the bearing and within a bearing cage; this results in a much more stable bearing when printed with far less slop especially axially. The inner- and outer-rings of the bearing also now dimensionally match the 6200 bearing making it usable in more situations. All of this combines to mean it will print with no support at all.

Because of the tight tolerances involved your dimensional accuracy will have to be pretty high, meaning a well tuned printer. Over extrusion is the enemy of this kind of model.

To print simply orient it flat side down, turn off support, and print! Your slicer may complain about cantilevers or floating regions, that's just fine, ignore its suggestion and don't turn on support.

Once it has printed put something, like a 10mm rod (or screwdriver, in my case) through the hole and give it a wiggle around to loosen it up. Once it starts turning you're good to go. You can add a little lubrication if you'd like or use it as is, I find that it turns well enough dry.

Tags