1 / 3
Bosch 12V refined feet with and without bit holder — image 1
1 / 3

Bosch 12V refined feet with and without bit holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are additional and refined feet for the Bosch Professional 12V system. They even include bit holders.

Rating
5 / 5
Likes
44
Downloads
263
Makes
1
Views
772
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This time the model should be in the right scale, so print it at 100%. Simply clip the print onto the battery and you should be good to go. To unclip it, you'll need a flat screwdriver. I have removed all the sharp edges from my older model. And also there is a bit holding function included. I've uploaded both versions of each foot: With or without the bit holding function. To hold these bits, I've added chamfered crush ribs, so you need really jam those in the first time you use it. They are chamfered in a way, that you shouldn't have to toy around to find the perfect fit. After you've jammed those bits in a few times, you should be able to use it comfortably. If those ribs wear out over time, you can add a dab of super glue and jam the bit again. I also like to add rubber feet under mine. There is plenty of surface to stick those on. 

I hope that helps and you like it!

Regards, Etna. 

Tags