Bosch 12V refined feet with and without bit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are additional and refined feet for the Bosch Professional 12V system. They even include bit holders.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 263
- Wydruki
- 1
- Wyświetlenia
- 769
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This time the model should be in the right scale, so print it at 100%. Simply clip the print onto the battery and you should be good to go. To unclip it, you'll need a flat screwdriver. I have removed all the sharp edges from my older model. And also there is a bit holding function included. I've uploaded both versions of each foot: With or without the bit holding function. To hold these bits, I've added chamfered crush ribs, so you need really jam those in the first time you use it. They are chamfered in a way, that you shouldn't have to toy around to find the perfect fit. After you've jammed those bits in a few times, you should be able to use it comfortably. If those ribs wear out over time, you can add a dab of super glue and jam the bit again. I also like to add rubber feet under mine. There is plenty of surface to stick those on.
I hope that helps and you like it!
Regards, Etna.