Adapter für 4:1 und 10:1 Kartuschen in Standard-Silikonspritzen (Ø 50 mm) // Adapter for 4:1 and 10:1 Cartridges in Standard Caulking Guns (Ø 50 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter für 4:1 & 10:1 Kartuschen (Ø 50 mm) zur Nutzung in Standard-Silikonspritzen – schnell gedruckt & praktisch.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Deutsch:
Dieser Adapter wurde entworfen, um 2K-Kartuschen mit einem Mischungsverhältnis von 4:1 oder 10:1 (Ø 50 mm) in einer ganz normalen Silikonspritze verwenden zu können. Eine praktische Lösung, wenn keine spezielle 2K-Pistole zur Verfügung steht.
Der Adapter sorgt für sicheren Halt und saubere Dosierung.
Gedruckt mit ASA, 0.6 mm Düse, 0.3 mm Schichthöhe, 15 % Infill und 2 Wandlinien – robust und schnell gefertigt.
Einfach Kartusche einsetzen, Adapter aufstecken und loslegen.
Ich freue mich über Feedback, Makes oder Verbesserungsvorschläge!
English:
This adapter was designed to allow 2-component cartridges with a 4:1 or 10:1 mixing ratio (Ø 50 mm) to be used in a standard caulking gun. A practical solution if you don’t have a dedicated 2K dispenser at hand.
The adapter ensures a secure fit and clean dispensing.
Printed in ASA with a 0.6 mm nozzle, 0.3 mm layer height, 15% infill, and 2 perimeters – sturdy and quick to print.
Just insert the cartridge, slide on the adapter, and you’re ready to go.
I’d love to hear your feedback, makes, or suggestions for improvement!
