2,224 models
You'll have to excuse the part names, I didn't know the correct technical term for most of them… I made this model as the others available online weren't all split by color and were over complicated in the number of parts (some containig…
Slim mount for Wago 221-41* wire connectors on the standard DIN rails. These models are perfect as leftover or wiping tower models. Update #20230417: added double and triple versions. Update #20240922: uploaded Fusion 360 source file.
Awesome model created by PaulElderDesign https://www.thingiverse.com/thing:1693443 You find PaulElderDesign over on Etzy I liked it so much I've scaled it up to fit my printer. I have stripped back the pieces to allow for easy printing in…
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…
This is a Wago 221-415 Mount for my DIN Rail Bracket. You can find the bracket here ! There are several versions, for 2, 4, 6, 8, 10 and 12 Wagos. STL and STEP files are without labels and can be edited to your needs. For the DIN Rail…
NACA Airfoil 2412. I use this for a test print for new materials or different settings. Uses surprisingly little filament for its size. Print instructions Suggested settings: one perimeter zero top and bottom layers gyroid infill 15%
DIN Rail Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor), Wago 221-415 (5-conductor) and Wago 221-420 (10-conductor) as well as mixed Connector mounts. Includes Models where the wago opens to the left (Models ends with L)…
⚫ Zetor 6341 ⚫ This is the last model for the year 2023. Expect a new models in 2024 Follow me on YouTube for more info about what you can look forward for. :-) Zetor 6341 is the last tractor I will make in foreseeable future. At least…
When I printed the “wago” mount for my Voron 2.4 build, I found my connectors did not fit the slots on the model. I realized the clips I had were knockoffs and not Wago by brand, however even the measured size of the slots is smaller than…
Wago mounts I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants. I also chaged the model cosmetically a bit. Wago Splitter I've also…
This model is compatible with the lego system.
Case to hold a LD2410 MMWAVE sensor module and a Wemos D1 mini board. The radar module can be rotated horizontally to adjust the angle and direction it is sensing. Four parts: The case that holds everything A holder for the radar module.…
This model is compatible with the lego system.
UPDATE: Added a “R2” version which allows the Wago's to be opened while mounted. It was the only complaint I've seen with this. I adjusted the rotation of the mounts, and slightly redesigned the overall holder. The centre Wago might be…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** For Makita LXT 18V Tools only: This is a tool holster and organizer designed for…
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
WAGO 221-413 and 221-613 Mount (3 x 2) Item no. 221-413 Connection technology CAGE CLAMP® Actuation type Lever Connectable conductor materials Copper Nominal cross-section 4 mm² / 12 AWG Solid conductor 0.2 … 4 mm² / 24 … 12 AWG Stranded…
This model is compatible with the lego system.
This model is compatible with the lego system.
Model for mounting 3x WAGO 221-2411 Inline Connector to standard DIN rail. Best printed on side for strength.
Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…
I designed this simple DIN rail mount to hold three WAGO 221-413 connectors . With a height of just 9.2 mm , two mounts fit into 1TE (the width of a standard European circuit breaker). It snaps firmly onto the rail and can be released…
Remix of OV1A creation. Liked the snap fit and clean design.
A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…
Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
This model is compatible with the lego system.
This model is compatible with the lego system.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
This model is compatible with the lego system.
This model is compatible with the lego system.
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
Small surface mount box, for hiding cables and wago connectors - just shorter Please use low-current sensor and signal wires only . It is not suitable for mains wiring due to potential safety risks and regulatory non-compliance.…
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
Build Guide: https://props3d.pro/aliens-pulse-rifle/ Join me and fellow prop makers on Discord and join in some build projects: https://discord.gg/NGWhc6a3Gv Note that like most of my things they're iterative. I'm an eternal tinkerer and…
In order to wire the controller fans of my voron I used wago terminals. I wanted to have the style like the ones that are used for mains voltage. That's why I used this design as template and adapted it for two wago terminals.
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
🧱Lego Duplo Brick 2x8 #4199🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
WAGO 3-way junction box. Suitable for 3-wire cables with a maximum cross-section of 1 mm². The cover is attached to the box using four thermal inserts with M2 threads. The screws require 5 mm.
The 4mm 3 wires Wago connector is a useful electrical fitting. Often, it needs to be secured to a base plate. Wago do have base clips, but inconvenient to get hold of. Here is my design for a quick solution. In addition to the Wago…
I split WAGO holder from VORON Trident assembly in CAD, for segments to be added or removed as desired. I needed mount for 2x and 5x WAGO 221-412. Fusion 360 file is available to edit according to your needs. Move segments 15.5 mm to…
How to print. For engine use recommended ASA or ABS any other high heat resist material. Might get away with PET since its off on top of the motor. (still it is your throttle body, be responsible) And test test test. Make sure when you…
Update: Die 3er Variante wurde hinzugefügt. Update: Die 4er und 5er Varianten waren fehlerhaft und wurden nun korrigiert. Update: Ich habe noch eine 5er Variante hinzugefügt. Update: Ich habe noch eine 4er Variante hinzugefügt. Ein…
Recently my family decided to remodel some parts of the house, that included cutting some walls using a grinding disk. In order to create channels to hide power cables in. I purchased a DeWALT DWE4156 along with a wall cutting disk, I was…
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
This model is compatible with the lego system.
A compact snap-on holder designed to mount three WAGO 221-415 connectors on a standard 35 mm DIN rail. Ideal for clean, tool-free installations in control cabinets, automation projects, or DIY setups. This version fits only the 5-port…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Spliced together a few different files to fit my own requirements. You may need to re-size/check the carrier dimensions depending on your own ESP32 board. I designed this to use with Jumper cables, i didn't have a screw for the DHT sensor…
This model is compatible with the lego system.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
After the second world war Alsthom (still with the letter “H” in the name) build 130 diesel electric locomotives for the Nederlandse Spoorwegen (Dutch state railways). They were based on a standard for locomotives in France and the French…
Voron V0 V0.1 1515 3x Wago 221-415 Mounts 2x M3x6 SHCS and 2x M3 nuts were sufficient for me. I ordered Wago Ex instead of the regular Wagos because they're white. And they're more useful in case you printer tends to explode.
Holder for Wago 221-413 and 221-415 to screw into wood or metal with flat head screws. Halter für Wago 221-413 und 221-415 zum anschrauben in Holz oder Metall mit Flachkopfschrauben.
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
This is left skirt which goes with https://www.printables.com/model/608317-btt-hdmi5-screen-mount-for-voron-24. Print Mirror for right side. Use skirt as per printer size.
Shop vacuum hose connectors The vacuum cleaner in my little workshop is located stationary in one corner of the workshop. To reach the other side of the workshop, I use several hoses from old vacuum cleaners that are connected to each…
This is a 3D printable open plenum Carburetor spacer. It fits square bore intake manifolds, for a 4150 carburetor. I made 4 different versions- 1" spacer with & without a 1/4" NPT vacuum port 2" spacer with & without a 1/4" NPT vacuum…
Wall mount for DeWalt DCG412 Angle Grinder
Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
Terminal Halter für Wago Klemmen im 2x design für 12V/24V Verkabelung. Da ich nur Stehende Exemplare gefunden habe hier mal eine flache, liegende Variante. Die Halter sind recht eng in der Toleranz und klemmen bei mir recht gut, ist es…
This model is compatible with the lego system.
Inspired by the GrainMax line of hopper bins by Meridian. Handle and Lid need M1 x 6mm screws to be attached. Bin has indent marks to guide a M1 drill bit. Ladders push into place. Additional holes can be drilled to attach string from the…
This model is compatible with the lego system.
💡 If you like my design, don’t forget to leave a like ❤ It really helps me keep creating more models. WAGO Dispenser is a practical dispenser designed for quick and organized dispensing of WAGO connectors. It provides easy access to the…
This is a taller version of the foot from the Jonsbo D31/D41 series of ATX computer cases. The purpose is to increase the gap under the case and improve airflow into the lower intake fans. The gap with the tall feet is now approximately…
Holder for XY-MOS D4184 Power MOSFET breakout module. Snap-in, no screws are needed to hold the module in place, but holes for small screws are included for extra security. I used 1.8*5.6mm sheet screws. Print Settings Printer Brand:…
I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge…
The model has multiple axes of rotation and is quick to assemble. You can also remove unnecessary parts of the fastening mechanism! This model additionally uses 8x3 magnets and 2x8 bolts. The software can be found on this page :…
Case for HLK-LD2410C mmWave & D1 mini ESP8266 to be added in a room or to be put on a wall. Material used for printing: PETG
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
This is a NACA 4412 based rib to build your own wing.
A key cap for the Logitech G413 Carbon Gaming Keyboard with multiple inserts so you can easily change the text. Designed so that the light shines on through (printed a couple of clear layers to help out). Actually, did one without the…
Needed a mount for 221-415 (or 5-way), since I like this design, I made it possible. Changed the mounting hole to fit M3 screws. Made a version for two and three clips. If you have any suggestions or questions, feel free to comment.
Based on drawings for cases from Apple, this case perfectly matches the contours of the watch to create a firm snap-on fit. Works with any 41mm Apple Watch 8 or 7. I used this to replace my broken OtterBox Case, and barely notice its on…
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
This model is compatible with the lego system.
2 different layouts to host Wago 221-412. Mount (2 x 2) Keep your electrical connections neat and tidy with the Simple Wago 221 Mount 2 x 2. It's quick, easy, and efficient! #organizedwiring #simplewago #electricalhacks. Do you like my…
I wanted to hang my McLaren F1 horizontally, but I couldn't find a bracket for it. So I made one! Fusion 360 files included, feel free to modify. The screw holes might be a bit small, but I had no problem with 4mm screws. Gcode file is…
Stepper Motor Nema 23 length 41-115mm shaft D8
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
The bike stand is fitting for all popular gravel bike tires. I made it possible to print all parts on Prusa Mini. I glued the parts together with a Loctite plastic superglue. designed for 28 inches tire, works for smaller tires as well.…
simple case for STMicroelectronics Nucle F411 RE, arduino headers and buttons accesible
This model is compatible with the lego system.
Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus
My attempt at the Tom Stanton VTOL wing. With two wing spars (16mm and 8mm) spaced 70mm from each other. Level with another at 0 deg of attack. Wing chord ~180mm Wing height ~23mm Ribs spaced 30mm apart.
I designed this for mains wiring up a 3D printer under the hood. The Voron SW uses 2 power supplys, and needs some wiring to be done. I could have used blades, and made a wire harness, but I wanted something I could easily take apart to…
A compact snap-on holder designed to mount three WAGO 221-413 connectors on a standard 35 mm DIN rail. Ideal for clean, tool-free installations in control cabinets, automation projects, or DIY setups. This version fits only the 3-port…
I was not happy with the wheel disc design on the Lego McLaren F1 Car released in 2022 (Kit 42141). Designed these as a replacement. The model you see printed in the pictures was done using a variable layer height of 0.2 at the base all…
