1 / 2
DeWalt trim router dust shroud (DWP611, DCW600, A27941) — image 1
1 / 2

DeWalt trim router dust shroud (DWP611, DCW600, A27941)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Capture dust from edge routing using DeWalt trim routers

Rating
4.5 / 5
Likes
78
Downloads
502
Makes
2
Views
2,490
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge routing (flush trimming, roundovers, chamfers, etc.)

It snaps on or off the 4 holes on the router base plate (A27941), no hardware required! The dust will be caught by the shroud, and will then be extracted by the above-base dust collection.

I'm using this on a DCW600, I'm pretty sure it's the same plate as used on the DWP611 corded trim router.

I printed this in PETG, upside down, with supports for the rim of the shroud.

Tags