Wago 221 412 413 and 415 mounts for 2020 extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WAGO adapters to mount on 2020 profile, suitable for tight places, lied flat on the mounting plane
- Rating
- 4.875 / 5
- Likes
- 131
- Downloads
- 1,340
- Makes
- 11
- Views
- 3,103
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Wago mounts
I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants.
I also chaged the model cosmetically a bit.
Wago Splitter
I've also added the model that can be used with a 15x30 label, used in Niimbot label maker. Thoas are awailable only in two-segment variants.
Could be used to share a line like a CanBus or power multiple 5v devices.
Printing
The model is already positioned, just put it in the slicer and print.
If you you intend to place it in a temperature-ssensitive area, like under the the print bed, I would strongly recommend to print it in ABS or at least PETG