1 / 3
Wago 221 412 413 and 415 mounts for 2020 extrusion — zdjęcie 1
1 / 3

Wago 221 412 413 and 415 mounts for 2020 extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WAGO adapters to mount on 2020 profile, suitable for tight places, lied flat on the mounting plane

Ocena
4,875 / 5
Polubienia
131
Pobrania
1357
Wydruki
11
Wyświetlenia
3140
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike
Wago mounts

I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants.

I also chaged the model cosmetically a bit.

Wago Splitter

I've also added the model that can be used with a 15x30 label, used in Niimbot label maker. Thoas are awailable only in two-segment variants.

Could be used to share a line like a CanBus or power multiple 5v devices.

Printing

The model is already positioned, just put it in the slicer and print.

If you you intend to place it in a temperature-ssensitive area, like under the the print bed, I would strongly recommend to print it in ABS or at least PETG

Tagi