ESP32 CASE - CO2 Monitor with SCD41 (Home Assistant Ready)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for ESP32 (SCD41 sensor box optional)
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 585
- Makes
- 0
- Views
- 871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Description:
Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home Assistant via ESPHome for real-time monitoring and automation.
Key Features:
High Precision: Powered by the SCD41 NDIR sensor (factory calibrated).
Home Assistant Native: Seamless integration via ESPHome (local control, no cloud required).
Customizable: Easily add automated notifications (e.g., "Time to open a window!") or custom dashboards.
Compact: Designed to be small, efficient, and easy to assemble.
How it works: The ESP32 communicates with the SCD41 sensor via the I2C protocol. ESPHome handles the data processing and sends the metrics directly to your Home Assistant instance over Wi-Fi.
Components Needed (Bill of Materials):
To build this project, you will need the following parts:
Microcontroller:
ESP32 DevKit V1 (or any standard ESP32 development board).
Sensor:
Sensirion SCD41 CO2 sensor module (often sold as a breakout board with I2C pins).
Wiring & Connection:
Jumper wires (Female-to-Female or Female-to-Male, depending on your board/sensor headers).
Breadboard (optional, for prototyping) or soldering equipment for a permanent build.
Power:
Micro-USB cable (for powering the ESP32).
Assembly (3D Printed Parts):
Insert your 3D printed case details here (e.g., "PLA filament, no supports needed, etc.")
Wiring Guide (I2C):ESP32 Pin
SCD41 Pin
3.3V
VCC
GND
GND
GPIO 21
SDA
GPIO 22
SCL
Software / Setup:
Install ESPHome in your Home Assistant.
Create a new device and choose "ESP32".
Use the following configuration code in your YAML file:
# Basic configuration snippet for SCD41
YAML CODE:
i2c:
sda: 21
scl: 22
sensor:
- platform: scd4x
co2:
name: "CO2 Level"
temperature:
name: "Temperature"
humidity:
name: "Humidity"
update_interval: 60s
Install the firmware (via USB for the first time, then OTA wirelessly).
Add the device to Home Assistant, and you are ready to go!