ESP32 CASE - CO2 Monitor with SCD41 (Home Assistant Ready)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for ESP32 (SCD41 sensor box optional)
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 593
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home Assistant via ESPHome for real-time monitoring and automation.
Key Features:
High Precision: Powered by the SCD41 NDIR sensor (factory calibrated).
Home Assistant Native: Seamless integration via ESPHome (local control, no cloud required).
Customizable: Easily add automated notifications (e.g., "Time to open a window!") or custom dashboards.
Compact: Designed to be small, efficient, and easy to assemble.
How it works: The ESP32 communicates with the SCD41 sensor via the I2C protocol. ESPHome handles the data processing and sends the metrics directly to your Home Assistant instance over Wi-Fi.
Components Needed (Bill of Materials):
To build this project, you will need the following parts:
Microcontroller:
ESP32 DevKit V1 (or any standard ESP32 development board).
Sensor:
Sensirion SCD41 CO2 sensor module (often sold as a breakout board with I2C pins).
Wiring & Connection:
Jumper wires (Female-to-Female or Female-to-Male, depending on your board/sensor headers).
Breadboard (optional, for prototyping) or soldering equipment for a permanent build.
Power:
Micro-USB cable (for powering the ESP32).
Assembly (3D Printed Parts):
Insert your 3D printed case details here (e.g., "PLA filament, no supports needed, etc.")
Wiring Guide (I2C):ESP32 Pin
SCD41 Pin
3.3V
VCC
GND
GND
GPIO 21
SDA
GPIO 22
SCL
Software / Setup:
Install ESPHome in your Home Assistant.
Create a new device and choose "ESP32".
Use the following configuration code in your YAML file:
# Basic configuration snippet for SCD41
YAML CODE:
i2c:
sda: 21
scl: 22
sensor:
- platform: scd4x
co2:
name: "CO2 Level"
temperature:
name: "Temperature"
humidity:
name: "Humidity"
update_interval: 60s
Install the firmware (via USB for the first time, then OTA wirelessly).
Add the device to Home Assistant, and you are ready to go!