1 / 6
Pulley with Bearing — image 1
1 / 6

Pulley with Bearing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Using a 608 bearing, this strong, compact pulley can accommodate ropes up to 6mm and support 40 kg (85 lb).

Rating
5 / 5
Likes
4
Downloads
37
Makes
0
Views
179
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I wanted to design a pulley that was compact, strong and didn't require any hardware.

My original no-hardware design was OK for decorative purposes, but when I actually lifted objects, the friction melted the plastic really quickly, after which the pulley didn't turn so nicely. From this, I concluded that hardware is required for a functional pulley.

Since I had some 608 bearings kicking around, I incorporated one into the design. Features:

  • Strong design (mine held 40 kg without complaining)
  • No supports needed
  • Easy assembly
  • Swivels open for threading the rope
  • Quick print (1 hour on my Mk3S)

My print settings: PETG, 0.2mm layer height including first layer*, 4 perimeters, 4 bottom layers, 5 top layers, 20% infill.

*Note: tolerances were tricky for this design, and it's specifically designed for a 0.2mm layer height, including the first layer. I don't expect any other layer height would work well.

Tags