1 / 2
Tesla Model S Toyota Logo Swap Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom holder that allows Tesla Model S owners to replace the Tesla logo with a Toyota emblem (original mount).
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 26
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount allows you to swap the Tesla logo on your Model S with a Toyota logo for a unique look. The design uses the original Tesla mounting mechanism so installation is simple and fully reversible.
Required materials
- Toyota logo emblem (100mm slightly curved version available on AliExpress)
- The emblem typically comes with adhesive backing already applied
- Lighter/torch/heat gun
Installation
- Remove the original Tesla emblem:
- Print this mount using your preferred filament (ASA, ABS or PETG recommended), use more walls around the screw holes to leave room to form the thread
- Heat up the screws from the original mount using a torch
- Screw the heated screws into the printed holes to create the thread (re-heat the screw if it gets too hard to turn)
- Attach the Toyota emblem to the printed mount using the pre-applied adhesive
- Install the mount using the original Tesla mounting points
Note: This is designed specifically for the Tesla Model S and uses a 100mm curved Toyota emblem.