1 / 10
Hori fighting stick Alpha usb-c addon - R1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This an usb-c attachment for the Hori fighting stick Alpha arcade stick
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is the R1 revision of https://www.printables.com/model/1288994-hori-fighting-stick-alpha-usb-c-addon-r0
R1 Improvements :
- Usb port protruding a little bit more to prevent thick usb plug from not inserting deep enough
- Rounder edged
- Back stop modified to handle flipped the pin header (now soldered on top of the pcb)
- Marking to reference the Vbus (+) side
Print recommendations:
- Layer height ≥ 0.2
- Infill 15%
- Support (avoid support in the back holes)
Required accessories:
- USB-c breakout board => https://www.amazon.fr/dp/B0DNZ1D9VC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
- 6 pins straight 2.54mm header
- 2x m3*5mm screws for the back stop
- 2x m3*14mm screws for the main body