Elegant Handleless Watering Can
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple yet elegant alternative implementation of a watering can, using the filling hole as the handle.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 38
- Makes
- 2
- Views
- 132
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Well, the title says it all really!
To make it watertight I can recommend the following:
- In Print Settings → Advanced, up the Infill/Perimeter to something like 40%. Might not matter or might help close some gaps
- Make sure you have enough perimeters and top/bottom surfaces (3 perimeters, 5 bottom surfaces)
- Up the extrusion multiplier a bit, like 2-5%, as this will also help with closing some gaps.
Also! I personally really like using some modest fuzzy skin settings for the outside to hide the seam and artifacts on an otherwise very smooth surface. It'll also make it look a bit softer and organic! For this print I prefer 0.2mm on both the point distance and thickness for the fuzzy skin settings. Apart from the bare model STL, you can find an extra 3mf file in the downloads with these settings pre-applied.
Hope you enjoy, Happy printing!