1 / 3
Hex wrench for Fiji overflow box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hex wrench for Fiji overflow box's bulkhead. I used it to fasten the overflow box to my jbj65 aquarium.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Hex wrench for the main bulkhead for the Fiji Cube Overflow box. Printed in PLA. the model is thicker. I found even the 7.5mm thickness to be of sufficient strength. Ensure you do not have a elephant's foot on the first layer. The design assumes 0.5mm tolerance on each side so its not snug but also not loose so that the wrench slips before moving. Printed with 3 walls, 0.4mm layer height with 0.6mm nozzle, 5 top layers, 4 bottom layers and 20% infill.