Filtre HEPA pour enceinte 3D IKEA Lack – Ventilateur 120 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sommaire Composants nécessaires Paramètres d’impression Fichiers Instructions de montage
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 45
- Makes
- 2
- Views
- 656
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
English version
HEPA Particle Filter – 3D Printed
This project aims to reduce the emission of fine particles and toxic compounds released during 3D printing, especially when using filaments like ABS, PETG, or even some types of PLA. This filtration system is specifically designed to integrate into an enclosure built using an IKEA Lack table.
✅ Required Components:
HEPA 13 Filter: Amazon link
120 mm Fan (12V): Amazon link
🧵 Print Settings:
Material: PLA
Infill: 20% gyroid pattern
Layer height: between 0.2 mm and 0.28 mm
Supports: Not required
📁 Included Files:
For wall mounting, use the file: wall_mount
For desk or flat surface installation, use the file: desk_mount
For IKA Lack, use the file: IKA_Lack_mount
🛠 Assembly Instructions for Wall Mount:
Start by installing the fan onto the main support bracket.
Mount the main support to the wall using appropriate screws and anchors.
Insert the HEPA filter into the housing.
Attach the cover to securely close the filter.
🛠 Assembly Instructions for IKA lack:
Install the fan on the back side of the housing, ensuring the airflow direction pulls air from the enclosure to the outside.
Remove the two protective grills and keep 4 screws for mounting. Secure the screws on the plastic side of the filter.
Mount the filter housing onto one wall of your enclosure (plexiglass, wood, or other material).
Add the protective cover (optional but recommended to prevent direct contact with the filter).
Insert the HEPA filter into the housing and close it using the printed cover.
💬 Notes:
This system is not a substitute for proper workshop ventilation, but it significantly improves air quality inside a closed 3D printer enclosure.
Filtre à particules HEPA – Impression 3D
Ce projet a pour objectif de réduire l’émission de particules fines et de composés toxiques libérés lors de l’impression 3D, notamment avec des filaments comme l’ABS, le PETG ou certains types de PLA.
Ce système de filtration est spécialement conçu pour s’intégrer dans une enceinte fabriquée à partir d’une table IKEA Lack.
✅ Composants nécessaires :
Filtre HEPA 13 : lien Amazon
Ventilateur 120 mm (12V) : lien Amazon
🧵 Paramètres d’impression :
Matériau : PLA
Remplissage : 20 % en motif gyroïde
Hauteur de couche : entre 0,2 mm et 0,28 mm
Supports : Aucun support requis
📁 Fichiers inclus :
Pour une fixation murale, utilisez le fichier : wall_mount
Pour une installation sur un bureau ou surface plane, utilisez le fichier : desk_mount
Pour une intégration dans une enceinte IKEA Lack, utilisez le fichier : IKA_Lack_mount
🛠 Instructions de montage – Fixation murale :
Commencez par installer le ventilateur sur le support principal.
Fixez le support principal au mur à l’aide de vis et de chevilles adaptées.
Insérez le filtre HEPA dans le boîtier.
Fixez le couvercle pour refermer et sécuriser le filtre.
🛠 Instructions de montage – IKEA Lack :
Installez le ventilateur à l’arrière du boîtier, en vous assurant que le flux d’air extrait l’air de l’enceinte vers l’extérieur.
Retirez les deux grilles de protection du ventilateur et conservez 4 vis pour le montage. Fixez les vis côté plastique du filtre.
Montez le boîtier du filtre sur une paroi de votre enceinte (plexiglas, bois ou autre).
Ajoutez le cache de protection (optionnel mais recommandé pour éviter tout contact direct).
Insérez le filtre HEPA dans son logement, puis refermez à l’aide du couvercle imprimé.
💬 Remarques :
Ce système ne remplace pas une ventilation professionnelle, mais il améliore grandement la qualité de l’air à l’intérieur d’une enceinte fermée.
Vous pouvez aussi ajouter un filtre à charbon actif pour capturer les COV si vous imprimez régulièrement avec des matériaux émetteurs.
