Minimalist CLAMP X 9/10 (for Crucial SSD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A versatile way to use the small and very fast external SSD. Magsafe version and Screw version.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 71
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
CLAMP X 9/10
This project allows for a simple and quick way to extend the usage possibilities of the exceptional Crucial X9 and X10 series external SSD drives and their pro versions (I personally have the X9 pro model, but the dimensions should be identical).
Minimalist Design
- Small and lightweight
- Attachment solely by pressure, sliding the drive in
- Utilizes the shape of the Crucial X9/10 drive edges to allow for secure positioning of the drive according to needs (such as cable length, distance from the smartphone camera, etc.)
- Minimum printing material used
- Minimum contact of the support with the SSD drive to avoid overheating
- Top part of the drive completely free to facilitate heat dissipation
… in other words, less is more!
Two Versions
- Magnetic, for attachment with the Magsafe system and in general to be positioned on the back of smartphones or a notebook (with a magnet or metal ring)
- Screw-on, which allows the use of the standard 1/4” / 20 mount to attach the drive to camera cages, cases with a screw hole, tripods, etc.
Accessories
- Magnetic version: the model was designed to insert a magnetic disc like this in the lower part (LINK https://www.amazon.it/dp/B093PL1CD8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_11) (diameter 57 mm and thickness 6 mm), it can be simply press-fit or, for greater security, locked with a drop of glue.
- Screw-on version: the model is designed for the use of a 1/4” / 20 screw with a D-ring like this (LINK https://www.amazon.it/dp/B09DT63SMV?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_16) (the smaller version) to mount and dismount the support even by hand, without tools, but standard screws of the appropriate length can obviously also be used.
Printing
The models in the photos were printed in PLA meta at 0.2 layer height (with my trusty Fokoos Odin-5 F3). The magnetic version requires supports, while the screw-on version does not.
Enjoy and Remix
I hope you like this project and find it useful! Let me know if you notice any problems or if you have other variations in mind to develop. If you are interested, you can remix the project; for this purpose, you will also find the editable .f3d file (Fusion 360, I am not an expert in this modeler, so please forgive any "con_fusion" in the file ;-).
Have a nice print!
Pit (Pietro) 360