1 / 11
SS Atlantic
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
BEFORE YOU PRINT! This is a very old model, meaning it's not very well made. Assembling it is quite a task. Also, it's made to be sunk, so there are holes in the bottom of the hull, but they can be plugged if needed.
All parts are in the .zip file.
Asslembled size: 60 x 6 x 7 cm
Print settings: Layer height 0.2mm for large parts, 0.15mm for details. Supports: Yes - for the Hull
Fasteners: You'll need 8 M3x12 screws and nuts for the hull, and 52 3x12 wood screws for the decks. Some parts reuire glue.