Spool storage, prusa compatible.
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€21.10 – €25.79 net (excluding VAT)
For file: vert spool storage_0.6n_0.3mm_PETG_MK3S_20h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €23.45 excluding VAT (range midpoint).
- Weight reported by the author
- 372 g
- Print time reported by the author
- 20.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I needed a slightly smaller version, and edited the walls for thickness to make them not warp in a crazy way
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
printed out of petg and a .6 nozzle
now i have true vertical storage.
i use small binder clips to line and hold the fronts.
also 10mm slab at the same height as the top if you want to delete the door track.
troubleshooting:
warping of the outside walls, heat up your bed to 85c~ and place the model on it's side with a spool in it for 7-10 min, and then let cool. should flatten right out