Display enclosure for 7 inch ESP32-8048S070C touchscreen display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 128
- Makes
- 1
- Views
- 639
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you wish because of the provided mounting holes in the base. These holes are also used to fix the stand to the base. The front is fixed by a rim on one side and a screw on the opposite side. The pcb of the display is screwed in the base with M3 bolts 6mm long. I used brass heated inserts.
This is where I bought the display: 800x480 touch display
But I think this display can be found under other brand names in other shops too.