Cable gland PG7 wall mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosed wall mounts for PG7 cable glands. Perfect for RVs and outdoor apliances.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 98
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The model was created from the need to run cables from the solar system to the inside of the car. It will be perfect for caravans, campers and other places where a waterproof cable passage through the wall will be needed. The model has dedicated 4mm holes for screws/bolts with a countersunk head. When assembling, consider the location of this housing so that there are no shelves where water can accumulate. The bottom of the housing and bolt holes should be sealed with a special sealant, e.g. Sikaflex 252 or similar. Due to the outdoor use, I recommend printing this model from ASA or other material resistant to large temperature differences and UV.