Abus U-lock bike lock mount using water bottle screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Abus U-lock bike lock mount that secures to the bike using the water bottle screws.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 94
- Makes
- 0
- Views
- 1,965
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I really disliked the stock mount that came with the Abus u-lock because the only place I could use it was on the back fork with the bar sticking up, and I felt it was in the way and prone to being broken there. I designed this lock body mount for the water bottle holder screws, and holders for the U-bar part of the lock that zip-tie onto the back fork.
Printed using 50% infill with 5 perimeters with PETG. 0.2mm layer height should be ok. No supports needed if you print it “pegs” up, but you'd lose strength that way. You could use less infill and perimeters probably, but I wanted it to last a while and I'm not very careful with things.
The lock body mount is in my opinion pretty good, and strong enough to take some abuse if you use a few perimeters and quite a bit of infill. The U-bar back fork holders could honestly use refinement/remixing, and I just haven't bothered because they work “ok” for now.