Dual 120mm Fan Mount Adapter for Single Slot (Tandem)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter lets you mount two 120mm fans onto a single 120mm fan slot in a PC case.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is an adapter to mount two 120mm fans into a single 120mm fan slot in a PC case. The fans are held in place by tight tolerances and friction, with no screws required. There’s a side gap for cable routing, and the design fits standard 120mm fan screw positions.
⚠ Important: You must route the fan cables through the side hole before pressing the fans into place, otherwise, the cables will not fit afterward.
Printed with these settings:
0.32 mm layer height
1 wall
20% infill
You can increase these values if you need a stronger part, but this setup worked for me. The print was slightly flexible, but held the fans firmly in place.
