Dual 120mm Fan Mount Adapter for Single Slot (Tandem)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter lets you mount two 120mm fans onto a single 120mm fan slot in a PC case.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter to mount two 120mm fans into a single 120mm fan slot in a PC case. The fans are held in place by tight tolerances and friction, with no screws required. There’s a side gap for cable routing, and the design fits standard 120mm fan screw positions.
⚠ Important: You must route the fan cables through the side hole before pressing the fans into place, otherwise, the cables will not fit afterward.
Printed with these settings:
0.32 mm layer height
1 wall
20% infill
You can increase these values if you need a stronger part, but this setup worked for me. The print was slightly flexible, but held the fans firmly in place.
