1 / 3
Libman High Power broom thread
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Has your pushbroom thread snapped? Print a new one!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 73
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is the thread for a Libman High Power pushbroom:
It goes inside the rod and the original hex sleeve goes outside. I used the original self drilling screw.
Be sure to put the sleeve on the rod before installing the thread!
I used Sunlu black PETG for this, but any durable filament should work.
- 0.2 layer height
- 10 walls (I set inner wall width to 120% for extra layer adhesion)
- 7 top and bottom layers
- 13% gyroid infill
I printed at a 45 degree angle with manual tree supports:
Good luck and happy sweeping!