K1 MAX Auxiliary Blast - V4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is designed to provide more air flow and not block the camera compared to the stock model.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 67
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an improved version of the stock and existing designs; it does not obstruct the camera, and the foot parts fit perfectly with the blower section. As this is the first model, I am aware of some issues, and a new version will be released soon. You can also share any problems you have identified.
You can achieve a problem-free print using Orca Slicer with the print settings shown in the images.
V2 Changes:
+Air outlets were adjusted to align perfectly with the table.
+Internal air ducts were optimized to ensure more even airflow.
+Optimization was made in the blower section to ensure the feet fit perfectly.
V2 VİDEO %40 FAN: https://disk.yandex.com/i/hTDp4MVPx3POJw
V3 Changes:
V3 is a model currently in the testing phase; please feel free to provide feedback.
+The channels for midfield air blowing have been updated.
+The rear and upper areas have been enlarged by 1mm for a more secure fit.
V4 Changes:
+The air flow at the inner channel outlet was adjusted.
+The air outlet area was narrowed to be aligned with the tray.
+Support and screw entry were added, allowing screws to be installed without plastic nuts.
+It is recommended that users of pre-V4 models upgrade to V4.