K1 MAX Auxiliary Blast - V4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is designed to provide more air flow and not block the camera compared to the stock model.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an improved version of the stock and existing designs; it does not obstruct the camera, and the foot parts fit perfectly with the blower section. As this is the first model, I am aware of some issues, and a new version will be released soon. You can also share any problems you have identified.
You can achieve a problem-free print using Orca Slicer with the print settings shown in the images.
V2 Changes:
+Air outlets were adjusted to align perfectly with the table.
+Internal air ducts were optimized to ensure more even airflow.
+Optimization was made in the blower section to ensure the feet fit perfectly.
V2 VİDEO %40 FAN: https://disk.yandex.com/i/hTDp4MVPx3POJw
V3 Changes:
V3 is a model currently in the testing phase; please feel free to provide feedback.
+The channels for midfield air blowing have been updated.
+The rear and upper areas have been enlarged by 1mm for a more secure fit.
V4 Changes:
+The air flow at the inner channel outlet was adjusted.
+The air outlet area was narrowed to be aligned with the tray.
+Support and screw entry were added, allowing screws to be installed without plastic nuts.
+It is recommended that users of pre-V4 models upgrade to V4.