Eddie Bust - Iron Maiden (MMU ready)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eddie is the mascot of the greatest band in the world, Iron Maiden! You can print this bust in five colours.
- Rating
- 4.6 / 5
- Likes
- 67
- Downloads
- 477
- Makes
- 5
- Views
- 4,141
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
What's this about?
This is Iron Maidens mascot, Eddie, in the “Book of Soul”-Edition. You can print this bust with every 3D printer in one colour, or with the MMU2 in five colours. For a single-colour print, use the provided *.stl-file. For a MMU-print, use the provided *.3mf-file, as explained below.
How to print this file in five colours?
You will need PrusaSlicer version 2.4 for a multimaterial print. In version 2.4, Prusa introduced “Multimaterial Painting”. In the provided *.3mf-file, this feature is used for the MMU printing; you can see the different colour regions by selecting the model and pressing the “N” button. Just make sure the selected filaments (e.g. main colour→Filament 1, second colour→Filament 2 etc…) and the purgin volumes are correct.
Description of the used settings in the *.3mf-file
- The provided *.3mf-file contains some settings you might need to change: It's set up to print the bust using a 0.6mm nozzle and 0.4mm layer heights. These settings are used to reduce the print time. The finished print still looks awesome with these settings, so I recommend to keep them. Just make sure to swap your nozzle or change it the print settings if you don't own a 0.6 nozzle.
- There are support blockers on the back of the bust. I found that this area does not need support, but you should check it for yourself.
- There is a generic cylinder at the bottom of the print. It is used to fix one “little defect” of the model. Without the cylinder, a small part of the first layer won't print perfectly.