CopTor System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and affordable joint-system, to set up your own copter parcours.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a set of printable joints to set up your fpv racing parcours.
There are elements for single and double gates and for single and double cubes as well.
Print with harder TPU material and get 25mm pvc pipes from your local dealer, along with some 3mm tent rope and pegs and isolation tubes.
Cut your pcv pipes to the desired length and apply a 7mm hole 10mm from each end. (use drill press and som broomstick to aid and drill slowly!)
then slide over the iso foam, snap in the joints, attach ropes and get some hands to set up your first gate/ cube.