1 / 2
Endeavour Organizer - The all-overhang challenge Organizer.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just how much do you really trust your overhangs?
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you really know your machine's ability to print overhangs?
This organizer prints in two parts and slots together to form this abstract piece. The outside part is comprised entirely of overhangs no less than 30° horizontally, and does not require supports or bridges at any point.
Orca slicer will show no auto supports at 29°:

I highly recommend the following settings:
- Good bed adhesion - this is crucial to get perfect overhangs on tall builds.
- 0.2 layer height - tall layer heights like 0.3 will always reduce your overhang quality and cause drooping.
- Inner / Outer wall order - better for overhangs.
- Calibrate pressure advance / retraction - you really don't want any bumps or oozing that will cause instability as the build goes up.
The picture above shows the outside shell printed in PETG to show that it is possible, but not without a struggle.
Show me what your machine can do.