1 / 18
Open / Closed Sign
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by Ikeda Yosuke's open/close sign design which relies on gravity and relatively frictionless joints, I…
- Rating
- 4.455 / 5
- Likes
- 266
- Downloads
- 1,780
- Makes
- 15
- Views
- 10,282
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Inspired by Ikeda Yosuke's open/close sign design which relies on gravity and relatively frictionless joints, I decided to design one using planetary gears to drive the movement of the letters. An animation of the transition can be seen here: https://youtu.be/TmrUlpgojlY
The gears are made to snap fit onto their respective axles, tolerances for rotational and press fit parts have been confirmed and should work well with a properly calibrated printer.
Updated 24/3/17:
- D in "closed" has finally been added to the design. Using the joiner.stl piece, the letter d should lay perfectly over the top of the c and the l. First glue the joiner to your gear_right in the correct position and then glue it to your letter d to allow proper alignment.
- Type has been refined a little bit, particularly on the letters e, d, c, and l.
Updated 11/2/17:
- Registration points added for letters to attach to gears
Split base plate for smaller build platforms (minimum build size required 160 x 160 mm) - Refined font to remove sharp edges
E and S/N has been chamfered on the bottom edge to avoid catching - Planet gears and gear_left have been heightened by 1mm in order avoid contact with the axle
gear_left has modified gears to only allow rotation in the direction such that letters don't touch each other.