1 / 2
Core One PTFE Bowden Tube Connector Mod (PC4-M6)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified right side handle that accepts a PC4-M6 fitting for external filament
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 112
- Makes
- 2
- Views
- 646
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This is a modified right-side handle that accepts PTFE bowden tubes using a PC4-M6 fitting for use with external filament dryers/storage.
Using the mod
- Remove the right side panel from the core one.
- Unscrew the side handle from the filament detector.
- Pull the existing PTFE tube out of the side handle and trim to 25.4mm (1in).
- Attach the new side handle as before.
- Insert the cut PTFE tube into the hole, then screw on the PC4-M6 fitting.
What you need
- PC4-M6 fitting (widely available on Amazon).
- 2x M3x8rT screws (from the orignal handle).
Print Recommendations
- Print with Prusament PETG Prusa Orange to match existing handle.
- Structural 0.2mm profile with Gyroid infill.
- No supports needed.