Direct drive mount for the printer CR-6 SE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Direct drive mount CR-6 SE
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 102
- Makes
- 0
- Views
- 1,408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I created my own version of the direct drive mount for the printer CR-6 SE, using the cr10 extruder.
To mount the 5015 cooler, I cut an m5 thread in the cooler hole and used an m5x20 screw.
The original motor must be installed using a slight force, bending the wall of the board mounting.
In the photo there is an older version of the mount model, I load a modified one - the cooler mount has been improved, an ear has been added for attaching the wires with a cable tie.
To use, you need to extend the wires to the heating element and the temperature sensor
This project became the prototype for my attachment:
https://www.thingiverse.com/thing:4701896
I used a nozzle from this project to cool the printed model:
https://www.thingiverse.com/thing:2551774