Underware mount for CalDigit TS4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your CalDigit TS4 on Multiboard/Underware. Generated using Andy Levesque's OpenSCAD generator.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 52
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an Underware mount for the CalDigit TS4, generated using Andy Levesque's Underware generator.
I don't really claim any ownership of this, since I just put the dimensions into Andy's code and this is the file it produced. I've marked it as licensed CC-NC-SA to match Andy's OpenSCAD code.
I printed it using PETG so there wouldn't be any risk of PLA softening from the continuous heat output of the TS4. It's designed to be mounted to Underware/Multiboard boards using David D's Multiconnect mounts. I used 4 of them, but there are plenty of channels on the model, and they use the easy mount variation so you can go with whatever you need.
I left most of the bottom side open so the TS4 can expose some of its cooling fins to the air.